The Denon PMA-3000NE delivers 160W per channel at 4 ohms and 80W per channel at 8 ohms, driving even the most demanding speaker to deliver superior sound in any scenario. Designed and manufactured at Denon facilities in Shirakawa, Japan.
CLICK HERE TO VIEW OWNERS MANUAL
Audio excellence, redefined
With an advanced push-pull amplifier, sophisticated digital processing, and a robust phono stage, the PMA-3000NE delivers all of your favorite music with clarity and precision.
Drives even the most demanding speakers
A push-pull amplifier, delivering 80W/channel into 8 ohms and 160W/channel into 4 ohms, effortlessly accommodates a range of speaker types and impedances.
Seamlessly integrate high-resolution digital audio
Digital connections, including optical, coaxial, and USB-B, support up to 384kHz/32- bit. Ultra AL32 Processing waveform interpolation produces smooth, high-resolution sound.
Unlock your vinyl collection’s full potential
The PMA-3000NE's phono stage supports both MM and MC cartridges, for the most faithful sonic reproduction regardless of cartridge type.
Advanced Amplifier Design
The PMA-3000NE delivers 80W/channel into 8 ohms and 160W/channel into 4 ohms. Its Advance UHC-MOS Single Push-pull Circuit and differential 1-stage amplifier drive demanding speakers with exceptional clarity and linearity.
Ultra AL32 Processing
Denon's Ultra AL32 Processing uses interpolation algorithms to produce highresolution output. Supporting input signals up to 384kHz/32-bit, it upsamples for smoother waveforms and improved sound reproduction.
High-performance MM/MC Phone Stage
The PMA-3000NE's phono stage supports both MM and MC cartridges for truest vinyl reproduction in any setup. A high-gain design and “simple and straight” circuitry minimize distortion for pure, detailed sound.
Digital Audio Inputs
The PMA-3000NE’s versatile digital connections, including optical, coaxial, and USB Type B, support up to 384kHz/32-bit and 11.2MHz DSD audio.
Analog Mode
Analog mode bypasses digital circuitry for a pure, all-analog sound. A Source Direct function bypasses the tone controls so that the signal path is as short and clean as possible, for enhanced clarity.
| Performance Specs | |
| Watts RMS per Channel (8-ohms) | 80 |
| Watts RMS per Channel (6-ohms) | Not given |
| Watts RMS per Channel (4-ohms) | 160 |
| Frequency Bandwidth at Rated Power | 20-20k Hz |
| THD at Rated Power | 0.07% |
| Minimum Impedance | 4 ohms |
| Amplifier Class | AB |
| Signal to Noise Ratio | 110 |
| DAC Bit Depth | 32-bit |
| DAC Sample Rate | 384 kHz |
| Features | |
| Built-in DAC (Digital to Analog Converter) | Yes |
| Wi-Fi | N/A |
| Built-in Radio Tuner | None |
| Room Correction | No |
| High-res Audio Playback | |
| From Network | No |
| From USB Thumb Drive (USB-A) | No |
| From Computer (USB-B) | Yes |
| From Computer (USB-C) | No |
| Connections | |
| WiFi | No |
| Bluetooth | No |
| RCA Line-level Inputs | 4 |
| XLR Line-level Inputs | No |
| Phono Input | Yes |
| Optical Digital Inputs | 3 |
| Coaxial Digital Inputs | 1 |
| USB Input | Yes |
| HDMI Inputs | 0 |
| Stereo Preamp Outputs | Yes |
| Subwoofer Outputs | No |
| Recording Output | Yes |
| HDMI Output | 0 |
| Home Theater Bypass | Fixed |
| Pre-out/Main-in Loop | No |
| Headphone Output | 1/4" |
| Removable Power Cord | IEC 2-prong |
| Dimensions | |
| Width (inches) | 17-1/8 |
| Height (inches) | 7-3/16 |
| Depth (inches) | 18-11/16 |
| Weight (pounds) | 55.11 |
Buying a Denon Factory Refurbished product is a great way to get "as-new" products at a considerable savings. Every product has been thoroughly tested, repaired (if necessary), cleaned and otherwise renewed to original condition. Next it's repackaged with original accessories included. When you consider that a factory-renewed Denon product undergoes such close scrutiny for defects and workmanship, you might actually be buying something that is in many ways better than new. And for your piece of mind and protection, your purchase is covered by a full 1 year parts and labor warranty valid at any authorized Denon repair center (you can look-up locations online here or call 800-497-8921)
Denon, like all electronics manufactures, receives products returned for various reasons. In 2023 consumers returned 23 billion dollars in electronics globally, of which less than 5% were found to be defective! Once a product has been opened, it must be resold as refurbished or open box and cannot be resold as new again. The history and reason why a product was returned is not provided to us, thus we cannot provide any additional details regarding its past. All products are processed by Denon certified technicians, where they are fully tested, repaired (only if necessary), and retested again to ensure the highest quality control. Each unit must pass a complete battery of test before it can be titled a "Denon Factory Refurbished" product.
Most (not all) units are cosmetically in Mint Condition (graded a 9 or higher on a scale of 1-10). Very minor signs of wear (light surface scuffs or minor scratches) may be present, although most units show little or no signs of any usage. We DO NOT sell products that are cosmetically damaged (cracked displays, broken knobs, heavy scratches, or physically abused) unless noted in the description. Unfortunately, we cannot provide actual photos of each unit or pick the best one for anyone, as they are all randomly chosen from our factory sealed boxes.
There are no reviews yet. Be the first to Write a Review (requires login).
